Another day of work and the roof is on. This is pretty much traditional roofing technique, plywood over a 2"x3" lumber frame, then a layer of tarpaper, then asphalt shingles.

Our six chickens inside the coop for the first time.

Coop windows are completed, trim is added, and the nest box is finished. The nest box is 3' x 1' and has a hinged roof.

An early look inside the coop. The pop door is on a pulley that runs along the ceiling and is operated from the large cleanout door. The food and water currently are kept in the run, but I will probably hang them in the coop during the winter.

Another day of work and the roof is on. This is pretty much traditional roofing technique, plywood over a 2"x3" lumber frame, then a layer of tarpaper, then asphalt shingles.

End of day one of building. The coop sits of 4"x4" posts and has a linoleum floor. The framing is 2"x3" lumber.

These are the only "plans" I drew for the coop. Designed to be cut easily from 4x8 sheets of plywood. The angled sides slope from 4-1/2' tall to 3-1/2'.

First day of coop building was 25 degrees with a foot of snow still in the yard

Another day of work and the roof is on. This is pretty much traditional roofing technique, plywood over a 2"x3" lumber frame, then a layer of tarpaper, then asphalt shingles.

kpscapes
Jul 8, 2014

There are no comments to display.